CALL NOW 1300 721 522

EpiMax 920 Solvent Based PU Hybrid Sealer is a two pack fully cross-linking, non-yellowing protective finish for concrete floors. In particular, the system is suitable for floors in high-traffic areas and to provide good resistance to scuffs and staining. EpiMax 920 is available in clear and coloured versions.

DOWNLOAD INFO

EpiMax 900HS High Solids Clear PU Sealer is a single component, high-solids, fully crosslinking protective sealer for a wide range of flooring applications. The product is inherently stable to the effects of ultra-violet radiation and hardens quickly to form a high gloss and chemical resistant film equivalent to two-part urethane coatings.

DOWNLOAD INFO

EpiMax 2150 is a single component water based, penetrating concrete densifier and protector for concrete slabs.

Special inorganic reactive chemistry generates additional cementing agents that physically increase the strength of the surface concrete and seal the surface.

This mechanism occurs by reacting with the free lime within the concrete itself to harden and densify the wearing surface and providing a sealing action at the same time.

This process significantly increases the abrasion resistance while reducing potential absorption due to water borne and oil borne contaminants.

This product is ideal for use in warehouses, distribution centres and car parks.

EpiMax 2150 provides protection while not affecting the appearance.

DOWNLOAD INFO

EpiMax 2185 Solvent Based Penetrating Sealer is used as the final critical step in the polished concrete preparation process.

EpiMax 2185 improves the stain resistance by restricting and delaying the absorption of stains into the polished concrete surface.

It also improves the lustre and appeal of entire floor.

This product offers the highest stain resistance of any penetrating sealers in the EpiMax range.

EpiMax 2185 is just one component in the EpiMax Polished Concrete Product Range

DOWNLOAD INFO

EpiMax 2180 Water Based Penetrating Sealer is used as the final critical step in the polished concrete preparation process.

EpiMax 2180 improves the stain resistance by restricting and delaying the absorption of stains into the polished concrete surface.

It also improves the lustre and appeal of entire floor.

This product is easy to apply and does not present offensive odours during or following the application process.

EpiMax 2180 is just one component in the EpiMax Polished Concrete Product Range.

DOWNLOAD INFO

EpiMax 237WB Rapid Dry Low VOC Primer Sealer is a two-component water based penetrating epoxy primer sealer designed for rapid and efficient impregnation of concrete.

DOWNLOAD INFO

EpiMax 237 Penetrating Epoxy Primer Sealer is a two-component penetrating epoxy primer sealer designed for rapid and efficient impregnation of concrete.

It is ideal for prolonging the serviceability of partially-deteriorated or porous concrete.

The system offers extremely low viscosity and is suitable for providing a stable foundation layer for the application subsequent concrete protection systems.

EpiMax 237 can also be used to provide an economical dust suppressing layer to weak, dusting concrete floors.

DOWNLOAD INFO

EpiMax 999WB Concrete Protective Sealer is a hazmat free, two component water based clear epoxy coating system specially formulated to provide ease of application, fast hardening and excellent adhesion to concrete.

DOWNLOAD INFO

EpiMax 900 Solvent Based Clear PU Sealer is a hard, stain resistant, non-yellowing, cross-linking protective sealer for concrete floor surfaces which offers excellent adhesion and finish retention.

This product enhances both the appearance and the stain resistance of industrial, commercial and residential concrete slabs.

DOWNLOAD INFO
  • Knowledge value at your fingertips <br>Signup to the Knowledge Centre.

    Knowledge value at your fingertips
    Signup to the Knowledge Centre.

    SIGNUP NOW